A | |
| acc [CamlinternalFormat] | |
| acc_formatting_gen [CamlinternalFormat] | |
| access_permission [UnixLabels] |
Flags for the
UnixLabels.access call.
|
| access_permission [Unix] |
Flags for the
Unix.access call.
|
| addr_info [UnixLabels] |
Address information returned by
Unix.getaddrinfo.
|
| addr_info [Unix] |
Address information returned by
Unix.getaddrinfo.
|
| alarm [Gc] |
An alarm is a piece of data that calls a user function at the end of
each major GC cycle.
|
| anon_fun [Arg] | |
B | |
| backtrace_slot [Printexc] |
The abstract type
backtrace_slot represents a single slot of
a backtrace.
|
| big_int [Big_int] |
The type of big integers.
|
| block_type [CamlinternalFormatBasics] | |
C | |
| c_layout [Bigarray] | |
| channel [Event] |
The type of communication channels carrying values of type
'a.
|
| char_set [CamlinternalFormatBasics] | |
| closure [CamlinternalOO] | |
| color [Graphics] |
A color is specified by its R, G, B components.
|
| complex32_elt [Bigarray] | |
| complex64_elt [Bigarray] | |
| control [Gc] |
The GC parameters are given as a
control record.
|
| counter [CamlinternalFormatBasics] | |
D | |
| data [Weak.S] |
The type of the elements stored in the table.
|
| dir_handle [UnixLabels] |
The type of descriptors over opened directories.
|
| dir_handle [Unix] |
The type of descriptors over opened directories.
|
| doc [Arg] | |
E | |
| elt [Set.S] |
The type of the set elements.
|
| elt [MoreLabels.Set.S] | |
| error [UnixLabels] |
The type of error codes.
|
| error [Unix] |
The type of error codes.
|
| error [Dynlink] | |
| event [Graphics] |
To specify events to wait for.
|
| event [Event] |
The type of communication events returning a result of type
'a.
|
| extern_flags [Marshal] |
The flags to the
Marshal.to_* functions below.
|
F | |
| file_descr [UnixLabels] |
The abstract type of file descriptors.
|
| file_descr [Unix] |
The abstract type of file descriptors.
|
| file_kind [UnixLabels] | |
| file_kind [Unix] | |
| file_name [Scanf.Scanning] |
A convenient alias to designate a file name.
|
| file_perm [UnixLabels] |
The type of file access rights, e.g.
|
| file_perm [Unix] |
The type of file access rights, e.g.
|
| float32_elt [Bigarray] | |
| float64_elt [Bigarray] | |
| float_conv [CamlinternalFormatBasics] | |
| flow_action [UnixLabels] | |
| flow_action [Unix] | |
| flush_queue [UnixLabels] | |
| flush_queue [Unix] | |
| fmt [CamlinternalFormatBasics] |
List of format elements.
|
| fmt_ebb [CamlinternalFormat] | |
| fmtty [CamlinternalFormatBasics] | |
| fmtty_rel [CamlinternalFormatBasics] | |
| format [Pervasives] | |
| format4 [Pervasives] | |
| format6 [Pervasives] | |
| format6 [CamlinternalFormatBasics] | |
| formatter [Format] |
Abstract data corresponding to a pretty-printer (also called a
formatter) and all its machinery.
|
| formatter_out_functions [Format] | |
| formatter_tag_functions [Format] |
The tag handling functions specific to a formatter:
mark versions are the 'tag marking' functions that associate a string
marker to a tag in order for the pretty-printing engine to flush
those markers as 0 length tokens in the output device of the formatter.
|
| formatting_gen [CamlinternalFormatBasics] | |
| formatting_lit [CamlinternalFormatBasics] | |
| fortran_layout [Bigarray] | |
| fpclass [Pervasives] |
The five classes of floating-point numbers, as determined by
the
classify_float function.
|
G | |
| getaddrinfo_option [UnixLabels] |
Options to
Unix.getaddrinfo.
|
| getaddrinfo_option [Unix] |
Options to
Unix.getaddrinfo.
|
| getnameinfo_option [UnixLabels] |
Options to
Unix.getnameinfo.
|
| getnameinfo_option [Unix] |
Options to
Unix.getnameinfo.
|
| group_entry [UnixLabels] |
Structure of entries in the
groups database.
|
| group_entry [Unix] |
Structure of entries in the
groups database.
|
H | |
| heter_list [CamlinternalFormat] | |
| host_entry [UnixLabels] |
Structure of entries in the
hosts database.
|
| host_entry [Unix] |
Structure of entries in the
hosts database.
|
I | |
| ignored [CamlinternalFormatBasics] | |
| image [Graphics] |
The abstract type for images, in internal representation.
|
| impl [CamlinternalOO] | |
| in_channel [Scanf.Scanning] |
The notion of input channel for the
Scanf module:
those channels provide all the machinery necessary to read from a given
Pervasives.in_channel value.
|
| in_channel [Pervasives] |
The type of input channel.
|
| inet_addr [UnixLabels] |
The abstract type of Internet addresses.
|
| inet_addr [Unix] |
The abstract type of Internet addresses.
|
| init_table [CamlinternalOO] | |
| int16_signed_elt [Bigarray] | |
| int16_unsigned_elt [Bigarray] | |
| int32_elt [Bigarray] | |
| int64_elt [Bigarray] | |
| int8_signed_elt [Bigarray] | |
| int8_unsigned_elt [Bigarray] | |
| int_conv [CamlinternalFormatBasics] | |
| int_elt [Bigarray] | |
| interval_timer [UnixLabels] |
The three kinds of interval timers.
|
| interval_timer [Unix] |
The three kinds of interval timers.
|
| interval_timer_status [UnixLabels] |
The type describing the status of an interval timer
|
| interval_timer_status [Unix] |
The type describing the status of an interval timer
|
K | |
| key [MoreLabels.Map.S] | |
| key [MoreLabels.Hashtbl.SeededS] | |
| key [MoreLabels.Hashtbl.S] | |
| key [Map.S] |
The type of the map keys.
|
| key [Hashtbl.SeededS] | |
| key [Hashtbl.S] | |
| key [Arg] | |
| kind [Bigarray] | |
L | |
| label [CamlinternalOO] | |
| layout [Bigarray] | |
| lexbuf [Lexing] |
The type of lexer buffers.
|
| linking_error [Dynlink] | |
| location [Printexc] |
The type of location information found in backtraces.
|
| lock_command [UnixLabels] |
Commands for
UnixLabels.lockf.
|
| lock_command [Unix] |
Commands for
Unix.lockf.
|
M | |
| meth [CamlinternalOO] | |
| msg_flag [UnixLabels] | |
| msg_flag [Unix] | |
| mutable_char_set [CamlinternalFormat] | |
N | |
| name_info [UnixLabels] |
Name of service or port number
|
| name_info [Unix] |
Name of service or port number
|
| nativeint_elt [Bigarray] | |
| num [Num] |
The type of numbers.
|
O | |
| obj [CamlinternalOO] | |
| open_flag [UnixLabels] |
The flags to
UnixLabels.openfile.
|
| open_flag [Unix] |
The flags to
Unix.openfile.
|
| open_flag [Pervasives] |
Opening modes for
open_out_gen and
open_in_gen.
|
| out_channel [Pervasives] |
The type of output channel.
|
P | |
| pad_option [CamlinternalFormatBasics] | |
| padding [CamlinternalFormatBasics] | |
| padty [CamlinternalFormatBasics] | |
| param_format_ebb [CamlinternalFormat] | |
| params [CamlinternalOO] | |
| passwd_entry [UnixLabels] |
Structure of entries in the
passwd database.
|
| passwd_entry [Unix] |
Structure of entries in the
passwd database.
|
| position [Lexing] |
A value of type
position describes a point in a source file.
|
| prec_option [CamlinternalFormatBasics] | |
| precision [CamlinternalFormatBasics] | |
| process_status [UnixLabels] |
The termination status of a process.
|
| process_status [Unix] |
The termination status of a process.
|
| process_times [UnixLabels] |
The execution times (CPU times) of a process.
|
| process_times [Unix] |
The execution times (CPU times) of a process.
|
| protocol_entry [UnixLabels] |
Structure of entries in the
protocols database.
|
| protocol_entry [Unix] |
Structure of entries in the
protocols database.
|
R | |
| ratio [Ratio] | |
| raw_backtrace [Printexc] |
The abstract type
raw_backtrace stores a backtrace in
a low-level format, instead of directly exposing them as string as
the get_backtrace() function does.
|
| raw_backtrace_slot [Printexc] |
This type allows direct access to raw backtrace slots, without any
conversion in an OCaml-usable data-structure.
|
| ref [Pervasives] |
The type of references (mutable indirection cells) containing
a value of type
'a.
|
| regexp [Str] |
The type of compiled regular expressions.
|
S | |
| scanbuf [Scanf.Scanning] |
The type of scanning buffers.
|
| scanner [Scanf] |
The type of formatted input scanners:
('a, 'b, 'c, 'd) scanner
is the type of a formatted input function that reads from some
formatted input channel according to some format string; more
precisely, if scan is some formatted input function, then scan
ic fmt f applies f to the arguments specified by the format
string fmt, when scan has read those arguments from the
formatted input channel ic.
|
| seek_command [UnixLabels] |
Positioning modes for
UnixLabels.lseek.
|
| seek_command [Unix] |
Positioning modes for
Unix.lseek.
|
| service_entry [UnixLabels] |
Structure of entries in the
services database.
|
| service_entry [Unix] |
Structure of entries in the
services database.
|
| setattr_when [UnixLabels] | |
| setattr_when [Unix] | |
| shape [CamlinternalMod] | |
| shutdown_command [UnixLabels] |
The type of commands for
shutdown.
|
| shutdown_command [Unix] |
The type of commands for
shutdown.
|
| signal_behavior [Sys] |
What to do when receiving a signal:
Signal_default: take the default behavior
(usually: abort the program), Signal_ignore: ignore the signal, Signal_handle f: call function f, giving it the signal
number as argument.
|
| sigprocmask_command [UnixLabels] | |
| sigprocmask_command [Unix] | |
| sockaddr [UnixLabels] | |
| sockaddr [Unix] | |
| socket_bool_option [UnixLabels] |
The socket options that can be consulted with
UnixLabels.getsockopt
and modified with UnixLabels.setsockopt.
|
| socket_bool_option [Unix] |
The socket options that can be consulted with
Unix.getsockopt
and modified with Unix.setsockopt.
|
| socket_domain [UnixLabels] |
The type of socket domains.
|
| socket_domain [Unix] |
The type of socket domains.
|
| socket_float_option [UnixLabels] |
The socket options that can be consulted with
UnixLabels.getsockopt_float
and modified with UnixLabels.setsockopt_float.
|
| socket_float_option [Unix] |
The socket options that can be consulted with
Unix.getsockopt_float
and modified with Unix.setsockopt_float.
|
| socket_int_option [UnixLabels] |
The socket options that can be consulted with
UnixLabels.getsockopt_int
and modified with UnixLabels.setsockopt_int.
|
| socket_int_option [Unix] |
The socket options that can be consulted with
Unix.getsockopt_int
and modified with Unix.setsockopt_int.
|
| socket_optint_option [UnixLabels] |
The socket options that can be consulted with
Unix.getsockopt_optint
and modified with Unix.setsockopt_optint.
|
| socket_optint_option [Unix] |
The socket options that can be consulted with
Unix.getsockopt_optint
and modified with Unix.setsockopt_optint.
|
| socket_type [UnixLabels] |
The type of socket kinds, specifying the semantics of
communications.
|
| socket_type [Unix] |
The type of socket kinds, specifying the semantics of
communications.
|
| spec [Arg] |
The concrete type describing the behavior associated
with a keyword.
|
| split_result [Str] | |
| stat [Gc] |
The memory management counters are returned in a
stat record.
|
| statistics [MoreLabels.Hashtbl] | |
| statistics [Hashtbl] | |
| stats [UnixLabels.LargeFile] | |
| stats [UnixLabels] |
The information returned by the
UnixLabels.stat calls.
|
| stats [Unix.LargeFile] | |
| stats [Unix] |
The information returned by the
Unix.stat calls.
|
| stats [CamlinternalOO] | |
| status [Graphics] |
To report events.
|
T | |
| t [Weak.S] |
The type of tables that contain elements of type
data.
|
| t [Weak] |
The type of arrays of weak pointers (weak arrays).
|
| t [Thread] |
The type of thread handles.
|
| t [String] |
An alias for the type of strings.
|
| t [Stream] |
The type of streams holding values of type
'a.
|
| t [StringLabels] |
An alias for the type of strings.
|
| t [Stack] |
The type of stacks containing elements of type
'a.
|
| t [Set.S] |
The type of sets.
|
| t [Random.State] |
The type of PRNG states.
|
| t [Queue] |
The type of queues containing elements of type
'a.
|
| t [Printexc.Slot] | |
| t [Obj] | |
| t [Nativeint] |
An alias for the type of native integers.
|
| t [Mutex] |
The type of mutexes.
|
| t [Set.OrderedType] |
The type of the set elements.
|
| t [MoreLabels.Set.S] | |
| t [MoreLabels.Map.S] | |
| t [MoreLabels.Hashtbl.SeededS] | |
| t [MoreLabels.Hashtbl.S] | |
| t [MoreLabels.Hashtbl] | |
| t [Map.OrderedType] |
The type of the map keys.
|
| t [Map.S] |
The type of maps from type
key to type 'a.
|
| t [Lazy] |
A value of type
'a Lazy.t is a deferred computation, called
a suspension, that has a result of type 'a.
|
| t [Int64] |
An alias for the type of 64-bit integers.
|
| t [Int32] |
An alias for the type of 32-bit integers.
|
| t [Hashtbl.SeededHashedType] |
The type of the hashtable keys.
|
| t [Hashtbl.HashedType] |
The type of the hashtable keys.
|
| t [Hashtbl.SeededS] | |
| t [Hashtbl.S] | |
| t [Hashtbl] |
The type of hash tables from type
'a to type 'b.
|
| t [Digest] |
The type of digests: 16-character strings.
|
| t [Condition] |
The type of condition variables.
|
| t [Complex] |
The type of complex numbers.
|
| t [Char] |
An alias for the type of characters.
|
| t [CamlinternalOO] | |
| t [BytesLabels] |
An alias for the type of byte sequences.
|
| t [Bytes] |
An alias for the type of byte sequences.
|
| t [Buffer] |
The abstract type of buffers.
|
| t [Bigarray.Array3] |
The type of three-dimensional big arrays whose elements have
OCaml type
'a, representation kind 'b, and memory layout 'c.
|
| t [Bigarray.Array2] |
The type of two-dimensional big arrays whose elements have
OCaml type
'a, representation kind 'b, and memory layout 'c.
|
| t [Bigarray.Array1] |
The type of one-dimensional big arrays whose elements have
OCaml type
'a, representation kind 'b, and memory layout 'c.
|
| t [Bigarray.Genarray] |
The type
Genarray.t is the type of big arrays with variable
numbers of dimensions.
|
| table [CamlinternalOO] | |
| tables [CamlinternalOO] | |
| tag [Format] | |
| tag [CamlinternalOO] | |
| terminal_io [UnixLabels] | |
| terminal_io [Unix] | |
| tm [UnixLabels] |
The type representing wallclock time and calendar date.
|
| tm [Unix] |
The type representing wallclock time and calendar date.
|
| token [Genlex] |
The type of tokens.
|
U | |
| usage_msg [Arg] | |
W | |
| wait_flag [UnixLabels] |
Flags for
UnixLabels.waitpid.
|
| wait_flag [Unix] |
Flags for
Unix.waitpid.
|
| window_id [GraphicsX11] |