• en

Chapter 2  The module system

This chapter introduces the module system of OCaml.

1  Structures

A primary motivation for modules is to package together related definitions (such as the definitions of a data type and associated operations over that type) and enforce a consistent naming scheme for these definitions. This avoids running out of names or accidentally confusing names. Such a package is called a structure and is introduced by the struct…end construct, which contains an arbitrary sequence of definitions. The structure is usually given a name with the module binding. Here is for instance a structure packaging together a type of priority queues and their operations:

module PrioQueue = struct type priority = int type 'a queue = Empty | Node of priority * 'a * 'a queue * 'a queue let empty = Empty let rec insert queue prio elt = match queue with Empty -> Node(prio, elt, Empty, Empty) | Node(p, e, left, right) -> if prio <= p then Node(prio, elt, insert right p e, left) else Node(p, e, insert right prio elt, left) exception Queue_is_empty let rec remove_top = function Empty -> raise Queue_is_empty | Node(prio, elt, left, Empty) -> left | Node(prio, elt, Empty, right) -> right | Node(prio, elt, (Node(lprio, lelt, _, _) as left), (Node(rprio, relt, _, _) as right)) -> if lprio <= rprio then Node(lprio, lelt, remove_top left, right) else Node(rprio, relt, left, remove_top right) let extract = function Empty -> raise Queue_is_empty | Node(prio, elt, _, _) as queue -> (prio, elt, remove_top queue) end;;
module PrioQueue : sig type priority = int type 'a queue = Empty | Node of priority * 'a * 'a queue * 'a queue val empty : 'a queue val insert : 'a queue -> priority -> 'a -> 'a queue exception Queue_is_empty val remove_top : 'a queue -> 'a queue val extract : 'a queue -> priority * 'a * 'a queue end

Outside the structure, its components can be referred to using the “dot notation”, that is, identifiers qualified by a structure name. For instance, PrioQueue.insert is the function insert defined inside the structure PrioQueue and PrioQueue.queue is the type queue defined in PrioQueue.

PrioQueue.insert PrioQueue.empty 1 "hello";;
- : string PrioQueue.queue = PrioQueue.Node (1, "hello", PrioQueue.Empty, PrioQueue.Empty)

Another possibility is to open the module, which brings all identifiers defined inside the module in the scope of the current structure.

open PrioQueue;;
insert empty 1 "hello";;
- : string PrioQueue.queue = Node (1, "hello", Empty, Empty)

Opening a module enables lighter access to its components, at the cost of making it harder to identify in which module a identifier has been defined. In particular, opened modules can shadow identifiers present in the current scope, potentially leading to confusing errors:

let empty = [] open PrioQueue;;
val empty : 'a list = []
let x = 1 :: empty ;;
Error: This expression has type 'a PrioQueue.queue but an expression was expected of type int list

A partial solution to this conundrum is to open modules locally, making the components of the module available only in the concerned expression. This can also make the code easier to read – the open statement is closer to where it is used– and to refactor – the code fragment is more self-contained. Two constructions are available for this purpose:

let open PrioQueue in insert empty 1 "hello";;
- : string PrioQueue.queue = Node (1, "hello", Empty, Empty)

and

PrioQueue.(insert empty 1 "hello");;
- : string PrioQueue.queue = Node (1, "hello", Empty, Empty)

In the second form, when the body of a local open is itself delimited by parentheses, braces or bracket, the parentheses of the local open can be omitted. For instance,

PrioQueue.[empty] = PrioQueue.([empty]);;
- : bool = true
PrioQueue.[|empty|] = PrioQueue.([|empty|]);;
- : bool = true
PrioQueue.{ contents = empty } = PrioQueue.({ contents = empty });;
- : bool = true

becomes

PrioQueue.[insert empty 1 "hello"];;
- : string PrioQueue.queue list = [Node (1, "hello", Empty, Empty)]

This second form also works for patterns:

let at_most_one_element x = match x with | PrioQueue.( Empty| Node (_,_, Empty,Empty) ) -> true | _ -> false ;;
val at_most_one_element : 'a PrioQueue.queue -> bool = <fun>

It is also possible to copy the components of a module inside another module by using an include statement. This can be particularly useful to extend existing modules. As an illustration, we could add functions that returns an optional value rather than an exception when the priority queue is empty.

module PrioQueueOpt = struct include PrioQueue let remove_top_opt x = try Some(remove_top x) with Queue_is_empty -> None let extract_opt x = try Some(extract x) with Queue_is_empty -> None end;;
module PrioQueueOpt : sig type priority = int type 'a queue = 'a PrioQueue.queue = Empty | Node of priority * 'a * 'a queue * 'a queue val empty : 'a queue val insert : 'a queue -> priority -> 'a -> 'a queue exception Queue_is_empty val remove_top : 'a queue -> 'a queue val extract : 'a queue -> priority * 'a * 'a queue val remove_top_opt : 'a queue -> 'a queue option val extract_opt : 'a queue -> (priority * 'a * 'a queue) option end

2  Signatures

Signatures are interfaces for structures. A signature specifies which components of a structure are accessible from the outside, and with which type. It can be used to hide some components of a structure (e.g. local function definitions) or export some components with a restricted type. For instance, the signature below specifies the three priority queue operations empty, insert and extract, but not the auxiliary function remove_top. Similarly, it makes the queue type abstract (by not providing its actual representation as a concrete type).

module type PRIOQUEUE = sig type priority = int (* still concrete *) type 'a queue (* now abstract *) val empty : 'a queue val insert : 'a queue -> int -> 'a -> 'a queue val extract : 'a queue -> int * 'a * 'a queue exception Queue_is_empty end;;
module type PRIOQUEUE = sig type priority = int type 'a queue val empty : 'a queue val insert : 'a queue -> int -> 'a -> 'a queue val extract : 'a queue -> int * 'a * 'a queue exception Queue_is_empty end

Restricting the PrioQueue structure by this signature results in another view of the PrioQueue structure where the remove_top function is not accessible and the actual representation of priority queues is hidden:

module AbstractPrioQueue = (PrioQueue : PRIOQUEUE);;
module AbstractPrioQueue : PRIOQUEUE
AbstractPrioQueue.remove_top ;;
Error: Unbound value AbstractPrioQueue.remove_top
AbstractPrioQueue.insert AbstractPrioQueue.empty 1 "hello";;
- : string AbstractPrioQueue.queue = <abstr>

The restriction can also be performed during the definition of the structure, as in 

module PrioQueue = (struct ... end : PRIOQUEUE);;

An alternate syntax is provided for the above: 

module PrioQueue : PRIOQUEUE = struct ... end;;

Like for modules, it is possible to include a signature to copy its components inside the current signature. For instance, we can extend the PRIOQUEUE signature with the extract_opt function:

module type PRIOQUEUE_WITH_OPT = sig include PRIOQUEUE val extract_opt : 'a queue -> (int * 'a * 'a queue) option end;;
module type PRIOQUEUE_WITH_OPT = sig type priority = int type 'a queue val empty : 'a queue val insert : 'a queue -> int -> 'a -> 'a queue val extract : 'a queue -> int * 'a * 'a queue exception Queue_is_empty val extract_opt : 'a queue -> (int * 'a * 'a queue) option end

3  Functors

Functors are “functions” from modules to modules. Functors let you create parameterized modules and then provide other modules as parameter(s) to get a specific implementation. For instance, a Set module implementing sets as sorted lists could be parameterized to work with any module that provides an element type and a comparison function compare (such as OrderedString):

type comparison = Less | Equal | Greater;;
type comparison = Less | Equal | Greater
module type ORDERED_TYPE = sig type t val compare: t -> t -> comparison end;;
module type ORDERED_TYPE = sig type t val compare : t -> t -> comparison end
module Set = functor (Elt: ORDERED_TYPE) -> struct type element = Elt.t type set = element list let empty = [] let rec add x s = match s with [] -> [x] | hd::tl -> match Elt.compare x hd with Equal -> s (* x is already in s *) | Less -> x :: s (* x is smaller than all elements of s *) | Greater -> hd :: add x tl let rec member x s = match s with [] -> false | hd::tl -> match Elt.compare x hd with Equal -> true (* x belongs to s *) | Less -> false (* x is smaller than all elements of s *) | Greater -> member x tl end;;
module Set : functor (Elt : ORDERED_TYPE) -> sig type element = Elt.t type set = element list val empty : 'a list val add : Elt.t -> Elt.t list -> Elt.t list val member : Elt.t -> Elt.t list -> bool end

By applying the Set functor to a structure implementing an ordered type, we obtain set operations for this type:

module OrderedString = struct type t = string let compare x y = if x = y then Equal else if x < y then Less else Greater end;;
module OrderedString : sig type t = string val compare : 'a -> 'a -> comparison end
module StringSet = Set(OrderedString);;
module StringSet : sig type element = OrderedString.t type set = element list val empty : 'a list val add : OrderedString.t -> OrderedString.t list -> OrderedString.t list val member : OrderedString.t -> OrderedString.t list -> bool end
StringSet.member "bar" (StringSet.add "foo" StringSet.empty);;
- : bool = false

4  Functors and type abstraction

As in the PrioQueue example, it would be good style to hide the actual implementation of the type set, so that users of the structure will not rely on sets being lists, and we can switch later to another, more efficient representation of sets without breaking their code. This can be achieved by restricting Set by a suitable functor signature:

module type SETFUNCTOR = functor (Elt: ORDERED_TYPE) -> sig type element = Elt.t (* concrete *) type set (* abstract *) val empty : set val add : element -> set -> set val member : element -> set -> bool end;;
module type SETFUNCTOR = functor (Elt : ORDERED_TYPE) -> sig type element = Elt.t type set val empty : set val add : element -> set -> set val member : element -> set -> bool end
module AbstractSet = (Set : SETFUNCTOR);;
module AbstractSet : SETFUNCTOR
module AbstractStringSet = AbstractSet(OrderedString);;
module AbstractStringSet : sig type element = OrderedString.t type set = AbstractSet(OrderedString).set val empty : set val add : element -> set -> set val member : element -> set -> bool end
AbstractStringSet.add "gee" AbstractStringSet.empty;;
- : AbstractStringSet.set = <abstr>

In an attempt to write the type constraint above more elegantly, one may wish to name the signature of the structure returned by the functor, then use that signature in the constraint:

module type SET = sig type element type set val empty : set val add : element -> set -> set val member : element -> set -> bool end;;
module type SET = sig type element type set val empty : set val add : element -> set -> set val member : element -> set -> bool end
module WrongSet = (Set : functor(Elt: ORDERED_TYPE) -> SET);;
module WrongSet : functor (Elt : ORDERED_TYPE) -> SET
module WrongStringSet = WrongSet(OrderedString);;
module WrongStringSet : sig type element = WrongSet(OrderedString).element type set = WrongSet(OrderedString).set val empty : set val add : element -> set -> set val member : element -> set -> bool end
WrongStringSet.add "gee" WrongStringSet.empty ;;
Error: This expression has type string but an expression was expected of type WrongStringSet.element = WrongSet(OrderedString).element

The problem here is that SET specifies the type element abstractly, so that the type equality between element in the result of the functor and t in its argument is forgotten. Consequently, WrongStringSet.element is not the same type as string, and the operations of WrongStringSet cannot be applied to strings. As demonstrated above, it is important that the type element in the signature SET be declared equal to Elt.t; unfortunately, this is impossible above since SET is defined in a context where Elt does not exist. To overcome this difficulty, OCaml provides a with type construct over signatures that allows enriching a signature with extra type equalities:

module AbstractSet2 = (Set : functor(Elt: ORDERED_TYPE) -> (SET with type element = Elt.t));;
module AbstractSet2 : functor (Elt : ORDERED_TYPE) -> sig type element = Elt.t type set val empty : set val add : element -> set -> set val member : element -> set -> bool end

As in the case of simple structures, an alternate syntax is provided for defining functors and restricting their result: 

module AbstractSet2(Elt: ORDERED_TYPE) : (SET with type element = Elt.t) =
  struct ... end;;

Abstracting a type component in a functor result is a powerful technique that provides a high degree of type safety, as we now illustrate. Consider an ordering over character strings that is different from the standard ordering implemented in the OrderedString structure. For instance, we compare strings without distinguishing upper and lower case.

module NoCaseString = struct type t = string let compare s1 s2 = OrderedString.compare (String.lowercase_ascii s1) (String.lowercase_ascii s2) end;;
module NoCaseString : sig type t = string val compare : string -> string -> comparison end
module NoCaseStringSet = AbstractSet(NoCaseString);;
module NoCaseStringSet : sig type element = NoCaseString.t type set = AbstractSet(NoCaseString).set val empty : set val add : element -> set -> set val member : element -> set -> bool end
NoCaseStringSet.add "FOO" AbstractStringSet.empty ;;
Error: This expression has type AbstractStringSet.set = AbstractSet(OrderedString).set but an expression was expected of type NoCaseStringSet.set = AbstractSet(NoCaseString).set

Note that the two types AbstractStringSet.set and NoCaseStringSet.set are not compatible, and values of these two types do not match. This is the correct behavior: even though both set types contain elements of the same type (strings), they are built upon different orderings of that type, and different invariants need to be maintained by the operations (being strictly increasing for the standard ordering and for the case-insensitive ordering). Applying operations from AbstractStringSet to values of type NoCaseStringSet.set could give incorrect results, or build lists that violate the invariants of NoCaseStringSet.

5  Modules and separate compilation

All examples of modules so far have been given in the context of the interactive system. However, modules are most useful for large, batch-compiled programs. For these programs, it is a practical necessity to split the source into several files, called compilation units, that can be compiled separately, thus minimizing recompilation after changes.

In OCaml, compilation units are special cases of structures and signatures, and the relationship between the units can be explained easily in terms of the module system. A compilation unit A comprises two files:

  • the implementation file A.ml, which contains a sequence of definitions, analogous to the inside of a struct…end construct;
  • the interface file A.mli, which contains a sequence of specifications, analogous to the inside of a sig…end construct.

These two files together define a structure named A as if the following definition was entered at top-level: 

module A: sig (* contents of file A.mli *) end
        = struct (* contents of file A.ml *) end;;

The files that define the compilation units can be compiled separately using the ocamlc -c command (the -c option means “compile only, do not try to link”); this produces compiled interface files (with extension .cmi) and compiled object code files (with extension .cmo). When all units have been compiled, their .cmo files are linked together using the ocamlc command. For instance, the following commands compile and link a program composed of two compilation units Aux and Main: 

$ ocamlc -c Aux.mli                     # produces aux.cmi
$ ocamlc -c Aux.ml                      # produces aux.cmo
$ ocamlc -c Main.mli                    # produces main.cmi
$ ocamlc -c Main.ml                     # produces main.cmo
$ ocamlc -o theprogram Aux.cmo Main.cmo

The program behaves exactly as if the following phrases were entered at top-level: 

module Aux: sig (* contents of Aux.mli *) end
          = struct (* contents of Aux.ml *) end;;
module Main: sig (* contents of Main.mli *) end
           = struct (* contents of Main.ml *) end;;

In particular, Main can refer to Aux: the definitions and declarations contained in Main.ml and Main.mli can refer to definition in Aux.ml, using the Aux.ident notation, provided these definitions are exported in Aux.mli.

The order in which the .cmo files are given to ocamlc during the linking phase determines the order in which the module definitions occur. Hence, in the example above, Aux appears first and Main can refer to it, but Aux cannot refer to Main.

Note that only top-level structures can be mapped to separately-compiled files, but neither functors nor module types. However, all module-class objects can appear as components of a structure, so the solution is to put the functor or module type inside a structure, which can then be mapped to a file.

The present documentation is copyright Institut National de Recherche en Informatique et en Automatique (INRIA). A complete version can be obtained from this page.